NUFORS-CR
Pneumatically operated level sensed condensate drain
The NUFORS-CR removes condensate from compressed air systems without using electricity and without the unnecessary loss of compressed air.
The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the NUFORS-CR’s orifice can be 6 mm, offering an increased reliability factor.
The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable. The NUFORS-CR features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.
In addition, the NUFORS-CR can be applied in applications that demand a higher IP rating (International Protection rating or Ingress Protection). The NUFORS-CR offers an IP68/NEMA6 rating.
Share
- Competitive ‘true green’ solution.
- No operating costs.
- No electricity required - install and go!
- Operating pressure up to 16 bar.
- Reduced stocking costs - 1 model covers 100 m³/min.
- Suitable for any type of compressed air system.
- No complicated sizing charts required.
- Compact and unique design.
- Successful draining of condensate due to large orifice (also heavily emulsified condensate).
- Incredibly easy and quick to install and to service.
- No complicated control air line and pressure regulator required.
- Integrated strainer.
- Top and side inlets available.
- Test feature.
- Robust aluminium housing.
- Direct acting valve construction for a reliable condensate discharge operation.
| 100 m³/min. (3500 CFM) |
| 1062 liters condensate per hour at 16 bar |
| 3 - 16 bar (44 - 230 psi) |
| 1 - 50 °C (34 - 122 °F) |
| 1 - 50 °C (34 - 122 °F) |
| IP68 (NEMA6) |
| 1/2″ BSP or NPT, 3 inlet options |
| 12 cm (top) and 9.7 & 1.5 cm (side) |
| 1/4″ BSP, with brass hose barb adapter |
| Direct acting |
| 6 mm |
| FPM |
| Yes |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
DOWNLOADS
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
BALL VALVE STRAINERS
The FLUIDRAIN and EZ-1 drain valves have an orifice of 4.5 mm (EZ-1 4.0 mm).
Learn More
NUFORS-CR, SEE HOW IT WORKS.
NUFORS-CR INTRODUCTION:
NUFORS-CR MAINTENANCE INSTRUCTIONS:
TIPS & TRICKS
Avoiding airlocks:
Features
- Competitive ‘true green’ solution.
- No operating costs.
- No electricity required - install and go!
- Operating pressure up to 16 bar.
- Reduced stocking costs - 1 model covers 100 m³/min.
- Suitable for any type of compressed air system.
- No complicated sizing charts required.
- Compact and unique design.
- Successful draining of condensate due to large orifice (also heavily emulsified condensate).
- Incredibly easy and quick to install and to service.
- No complicated control air line and pressure regulator required.
- Integrated strainer.
- Top and side inlets available.
- Test feature.
- Robust aluminium housing.
- Direct acting valve construction for a reliable condensate discharge operation.
Specifications
| 100 m³/min. (3500 CFM) |
| 1062 liters condensate per hour at 16 bar |
| 3 - 16 bar (44 - 230 psi) |
| 1 - 50 °C (34 - 122 °F) |
| 1 - 50 °C (34 - 122 °F) |
| IP68 (NEMA6) |
| 1/2″ BSP or NPT, 3 inlet options |
| 12 cm (top) and 9.7 & 1.5 cm (side) |
| 1/4″ BSP, with brass hose barb adapter |
| Direct acting |
| 6 mm |
| FPM |
| Yes |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
Certificates
Downloads
DOWNLOADS
Accessories
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
BALL VALVE STRAINERS
The FLUIDRAIN and EZ-1 drain valves have an orifice of 4.5 mm (EZ-1 4.0 mm).
Learn More
Movie
NUFORS-CR, SEE HOW IT WORKS.
NUFORS-CR INTRODUCTION:
NUFORS-CR MAINTENANCE INSTRUCTIONS:
TIPS & TRICKS
Avoiding airlocks: