KAPTIV-CS-HP
Electronic zero air loss drain up to 50 bar
The KAPTIV-CS-HP is a compact electronically operated level sensed condensate drain which offers zero air-loss during the condensate discharge cycle for applications up to 50 bar.
The KAPTIV-CS-HP is cost effective and offers a rapid pay-back period due to a competitive pricing level, low stocking cost, zero air loss and energy saving aspects.
The KAPTIV-CS-HP can be installed in all compressed air system components up to 100 m3/min. regardless size and climate zone – only 1 model needed!
The robust industrial housing, the alarm feature and the 2/2 way direct acting valve assembly make the KAPTIV-CS-HP a reliable solution for all compressed air system applications. The KAPTIV-CS-HP can be applied in oil lubricated as well as oil-free applications.
The KAPTIV-CS-HP offers an integrated mesh strainer (to prevent large particles from entering the valve orifice), is easy to disassemble and is service friendly.
Share
- Capacitive level sensing technology saves air, energy and money.
- Operating pressure up to 50 bar.
- Competitive compact zero air loss draining solution.
- Alarm function (N/O or N/C) incorporated as a standard.
- No sizing charts required.
- The KAPTIV-CS-HP can be connected to any alarm device.
- Visual display of operating status.
- Direct acting valve assembly, ensuring reliable discharge operation.
Robust aluminium housing with three inlet options, offering you installation flexibility.
Integrated mesh strainer to protect the valve from clogging.
Extremely easy to disassemble, offering you maintenance speed and simplicity.
| 100 m³/min. (3500 CFM) |
| 120 liters condensate per hour at 50 bar |
| 0 - 50 bar (0 - 725 psi) |
| 1 - 50 °C (34 - 122 °F) |
| 1 - 50 °C (34 - 122 °F) |
| 230VAC / 115VAC / 24VAC / 24VDC |
| IP65 (NEMA4) |
| DIN 43650-B |
| 1/2″ BSP or NPT, 3 inlet options |
| 11 cm (top) and 7.5 & 1.5 cm (side) |
| 1/4″ BSP, with brass hose barb adapter |
| 2/2 way, direct acting |
| 1.8 mm |
| FPM |
| Yes |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
| Yes, LED indication |
| Normally Open alarm output contact -potential free relay (Normally open contacts, closed when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode) |
| Normally Closed alarm output contact -potential free relay (Normally closed contacts, open when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode) |
DOWNLOADS
INSTALLATION MANUAL
Select your desired language and click the download button
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More
Features
- Capacitive level sensing technology saves air, energy and money.
- Operating pressure up to 50 bar.
- Competitive compact zero air loss draining solution.
- Alarm function (N/O or N/C) incorporated as a standard.
- No sizing charts required.
- The KAPTIV-CS-HP can be connected to any alarm device.
- Visual display of operating status.
- Direct acting valve assembly, ensuring reliable discharge operation.
Robust aluminium housing with three inlet options, offering you installation flexibility.
Integrated mesh strainer to protect the valve from clogging.
Extremely easy to disassemble, offering you maintenance speed and simplicity.
Specifications
| 100 m³/min. (3500 CFM) |
| 120 liters condensate per hour at 50 bar |
| 0 - 50 bar (0 - 725 psi) |
| 1 - 50 °C (34 - 122 °F) |
| 1 - 50 °C (34 - 122 °F) |
| 230VAC / 115VAC / 24VAC / 24VDC |
| IP65 (NEMA4) |
| DIN 43650-B |
| 1/2″ BSP or NPT, 3 inlet options |
| 11 cm (top) and 7.5 & 1.5 cm (side) |
| 1/4″ BSP, with brass hose barb adapter |
| 2/2 way, direct acting |
| 1.8 mm |
| FPM |
| Yes |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
| Yes, LED indication |
| Normally Open alarm output contact -potential free relay (Normally open contacts, closed when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode) |
| Normally Closed alarm output contact -potential free relay (Normally closed contacts, open when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode) |
Certificates
Downloads
DOWNLOADS
Installation Manual
INSTALLATION MANUAL
Select your desired language and click the download button
Accessories
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More